# New HUD Readout for HP vs. EHP

**URL:** <https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028>\
**Category:** Photon UI\
**Created:** [November 12, 2026, 6:40pm UTC](https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028 "2026-11-12T18:40:09Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![ClimaxChild\_raygu](https://sea1.discourse-cdn.com/eveonline/user_avatar/forums.eveonline.com/climaxchild_raygu/32/508925_2.png) [@ClimaxChild\_raygu](https://forums.eveonline.com/u/ClimaxChild_raygu)\
**Post date:** [November 12, 2026, 6:40pm UTC](https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028/1 "2026-11-12T18:40:09Z")

</div>

Currently it would appear the new HUD is using HP to determine the relative width of each of the 3 Health Bars.  
While it is a good addition that you can hover to see you Resistances in each bar, I would please ask that the ability to switch to a mode where the width of your health bars is reflective of you EHP in that bar Not HP

Reasoning being if im in a shield tanked ship with low total hitpoint buffer but very high resistances the current hud will still show relatively even bars even though the majority of my EHP is stored in my shield bar. Having the option to display EHP instead of raw HP would improve readability of incoming damage. as it currently stands only ships with large pools of raw HP have clearly visible swings in HP bar width.

---

<div class="post-metadata">

**Author:** ![Syzygium](https://sea1.discourse-cdn.com/eveonline/user_avatar/forums.eveonline.com/syzygium/32/516281_2.png) [@Syzygium](https://forums.eveonline.com/u/Syzygium)\
**Post date:** [November 12, 2026, 7:03pm UTC](https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028/2 "2026-11-12T19:03:57Z")

</div>

the question then is: EHP against _which damage type_ 🙂

Your weakest? Omni? Average Resistance?

---

<div class="post-metadata">

**Author:** ![ClimaxChild\_raygu](https://sea1.discourse-cdn.com/eveonline/user_avatar/forums.eveonline.com/climaxchild_raygu/32/508925_2.png) [@ClimaxChild\_raygu](https://forums.eveonline.com/u/ClimaxChild_raygu)\
**Post date:** [November 12, 2026, 7:25pm UTC](https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028/3 "2026-11-12T19:25:02Z")

</div>

Would have to be averaged out, which is possible to display See: Pyfa

---

<div class="post-metadata">

**Author:** ![Lesican](https://sea1.discourse-cdn.com/eveonline/user_avatar/forums.eveonline.com/lesican/32/448285_2.png) [@Lesican](https://forums.eveonline.com/u/Lesican)\
**Post date:** [November 12, 2026, 8:40pm UTC](https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028/4 "2026-11-12T20:40:08Z")

</div>

it would be nice if it showed my shield as the biggest bar if i have a multi spec, shield booster and EM rig just because the hull is gallente. Right now it says i am hull tanked

---

<div class="post-metadata">

**Author:** ![Gerard\_Amatin](https://sea1.discourse-cdn.com/eveonline/user_avatar/forums.eveonline.com/gerard_amatin/32/481361_2.png) [@Gerard\_Amatin](https://forums.eveonline.com/u/Gerard_Amatin)\
**Post date:** [November 12, 2026, 10:29pm UTC](https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028/5 "2026-11-12T22:29:17Z")

</div>

I’d prefer to simply see my shield, armor and hull with consistent angles at a quick glance without having to interpret it based on the fit I’m currently flying.

If I wanted to see my main tank layer I’d look at my modules.

By pushing this redundant info the hitpoint display is less readable for it’s primary purpose of showing our hitpoints in a quickly readable unambiguous manner.

---

<div class="post-metadata">

**Author:** ![Lucy\_Alfrir](https://sea1.discourse-cdn.com/eveonline/user_avatar/forums.eveonline.com/lucy_alfrir/32/519425_2.png) [@Lucy\_Alfrir](https://forums.eveonline.com/u/Lucy_Alfrir)\
**Post date:** [November 13, 2026, 12:21am UTC](https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028/6 "2026-11-13T00:21:27Z")

</div>

> [@ClimaxChild\_raygu](#):
>
> See: Pyfa

Pyfa has a whole range of options for incoming damage type, I don’t think that would be helpful in game.

---

<div class="post-metadata">

**Author:** ![ClimaxChild\_raygu](https://sea1.discourse-cdn.com/eveonline/user_avatar/forums.eveonline.com/climaxchild_raygu/32/508925_2.png) [@ClimaxChild\_raygu](https://forums.eveonline.com/u/ClimaxChild_raygu)\
**Post date:** [November 13, 2026, 2:28am UTC](https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028/7 "2026-11-13T02:28:45Z")

</div>

Hey bro lets put on our thinking cap here and realize im saying that you can display an averaged EHP readout, since its possible in pyfa already.

---

<div class="post-metadata">

**Author:** ![ClimaxChild\_raygu](https://sea1.discourse-cdn.com/eveonline/user_avatar/forums.eveonline.com/climaxchild_raygu/32/508925_2.png) [@ClimaxChild\_raygu](https://forums.eveonline.com/u/ClimaxChild_raygu)\
**Post date:** [November 13, 2026, 2:29am UTC](https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028/8 "2026-11-13T02:29:08Z")

</div>

yeah bro your brain might just be cooked

---

<div class="post-metadata">

**Author:** ![Lucy\_Alfrir](https://sea1.discourse-cdn.com/eveonline/user_avatar/forums.eveonline.com/lucy_alfrir/32/519425_2.png) [@Lucy\_Alfrir](https://forums.eveonline.com/u/Lucy_Alfrir)\
**Post date:** [November 13, 2026, 11:02am UTC](https://forums.eveonline.com/t/new-hud-readout-for-hp-vs-ehp/522028/9 "2026-11-13T11:02:32Z")

</div>

Yes, I’m not sure what benefit showing ehp against flat damage does, which I assume is this average you talk of.

Very misleading if someone is shooting into your resist holes 😳
