Love the new HUD, though the Sensor Overlay will be missed
my feedback after using it for some days now
- let us make the ui not transparent, really hard to see mods etc in bright background system , like caldari space, also when full screen scanning the background is shown all the time, really annoying having the background of space flickering as u warp and again harder to see mods status
- let us move this text with out moving the ui, i want the ui more to the left but then some window i dont have open in the screenshot block the text
- let us just right click this icon to turn auto tracking on and off like the old one, instead of opening the small menu (yes i know there is a shortcut)
- the warping or speed needs to be bigger or more defined, was alot easier to see that u exit warp on the old one
- remove the gray “fog” on active mods, i know if a mod is active or passive, again let us turn of transparency and have all mods have a black background
- the ui is to big, make the gap between the icons smaller
- let me remove the prob/scan buttons, i dont need them, i have d-scan/prob window open all the time and know were to find them
- really hard to see if the cloak is active when in bright space,
- not in the pic but the shield armor,hull indicator is just strange and confusing, have it be all the same size or 3 lines like the old one
overall its not bad, but alot of small annoying stuff that need to be fixed/removed, think the key thing is you need to make it ALOT more customisable
Doesn’t address the issue at all, but it does include classics like this:
“If you’ve ever been in a situation where your Drake Navy Issue’s shields are getting low, and you start aligning out only to watch in dismay as your armor and hull evaporate in a few seconds. It’s probably because you forgot just how much of your precious HP was in those shields compared to the other two defense layers. With this change, you will now have a clearer picture of how much HP you have left, and maybe you’ll align sooner and warp out in time!”
I actually hope that was AI generated, because if not we’re dealing with an idiot.
In the new UI, the overheat health bars under the modules are way too hard to see during combat. Please consider improving their visibility by using a clear two-color indicator (Red/Green) or whatever so we can easily track heat damage at a glance. Thanks!
I told them to change the icons to diffrent states.
Give them cracks, smoke and fire at 25% 50% 75% and 99%…
Let me feel my ship is screaming for help under the load over overheat.
What did we got… a small red healtbar like Australian spiders.
Here.. let me lowball the idea with AI…
Cause you made RED BAR and lowballed so let me lowball back…
Current HUD:
Edited HUD:
Edited HUD Annotated:
HUD Feedback (numbers refer to the Edited HUD Annotated image)
- Speedometer
The current speed bar is vertical and fills from bottom to top. This is confusing, because the rest of the HUD reads top to bottom and horizontally. The speed number (x m/s) is also much too small, and its light grey blends into the background. I’d suggest making the speedometer bigger, increasing the size of the speed number, and/or placing it under the main medallion (as seen in the annotated HUD image marked 1). This is easier to read and keeps the layout of the old speedometer while still using the new modern style. - Capacitor
The capacitor pizza is too small, which makes it hard to read. I’d suggest making it bigger so you can better see the individual cap bars and they don’t blend together (annotated HUD image marked 2). - Health bar
The health bar is too dark and too transparent. I’d suggest increasing the opacity and using a brighter red (3). - Active module indicator
Active modules currently show a small white indicator. I’d suggest changing this to green (4) so it stands out more. This matters most for modules like the cloak that do not have a cycle indicator. - Module cycle bar
The module cycle bar is currently grey, and the heat damage bar and stack indicator cover part of it. I’d suggest making it a brighter white (5). Nothing should cover the cycle bar. - Overheating a cycling module
When you overheat a module that is mid-cycle, the current HUD immediately shows it as overheated with the larger red bar at the top. This is misleading, because the module only starts overheating after its current cycle finishes. I’d suggest an in-between state: if you overheat a module while it is cycling, show it in yellow/orange (6). Once the cycle finishes and the module is actually overheating, switch it to red (7). - Heat damage bar
The heat damage bar is far too small. I’d suggest larger heat damage bars with a colour gradient based on % damaged (8).
Overall I like the direction of the new HUD, with some tweaks I’m sure it’ll get into a good state.
I’d like warp speed to show as it does currently.
First time testing today.
- The noises are horrible, but at least you can quickly mute secondary interfaces with guidance from a corpmate - though thats not a particularly obvious setting to me ‘HUD noises’ would have been clearer lol
- The heat bar is tiny and the heat area is just distracting and useless
- Other than that, hate every part of it. Hope whichever Canva AI unit did this to us steps on a lego.
Honestly, all i’ve been seeing on this thread is ungratefulness, endless whining about the tiniest little details, people who haven’t even read why the new HUD icons are placed in that specific way. Very well then, hear me out: Use the old one! There’s a switch in the settings for you to use the legacy HUD! It’s not like CCP is forcing you to use the new one, the choice is totally yours.
So, after some testing, I would like to add my two cents:
Things I like:
- Being able to set an exact speed is great!
- Seeing my resistance profile on hover
Things I don’t like:
-
Overheated modules turning red before they are even damaged. The difference between a burning and a pre-heated module need to be visible at a glance.
-
The hud got bigger. It was said to not increase it’s screen usage, but it does. Even quite considerably.
-
Overall bad visibility due to low contrast.
-
Safety settings opening on hover.
Things that really bother me:
-
The sound: you can turn it off, but that also mutes D-Scan. For those of us that feel comforted by the noise of knowing it pings, it is very uncomfortable.
-
The elephant in the room: The health bars. The new design is of course uncomfortable because it is new and Eve Players tend to dislike new things. It also brings a few problems though. To name a few:
- Changing ships: If you change ships rapidly in combat (escape frigate, dock and change ship…) your tank moves. This means you take longer to understand where your current tank is.
- Active tank: Sometimes the HP pool means close to nothing. Especially on Minmatar ships, you might want to focus on your shields, but armour has actually more HP. Bad readability for actively tanked ships.
- HP vs EHP: You cannot reasonably factor in resists, but they may change your tank situation considerably.
- Command Bursts: getting or loosing links will change the proportions of your tank! Very unpleasant
- Offlining or burning buffer modules: same as above
All in all, imagine driving your car, but every time you look at the road, the tachometer and the rev counter have a 78% chance of changing places. Try seeing at a glance how fast you are going while not missing the child crossing the road in front of you (The interceptor b-lining for you).
It is not unusual in other games to have two or more bars of equal size representing different types of defence while depleting at different rates. Please do not take this from us in Eve.
In the end, for me the new HUD trades a lot of the elegance and compact design of the old one for nothing but a nice speed setting and a LOT of issues.
I want to support the direction of Eve Forever very much, but some long proven concepts should not be changed when looking at the future. Stacked healthbars are a part of Eve for pretty much as long as I know through all iterations of the hud. Please let us keep them!
Fly safe!
Yes, but they have stated they are going to force us to use it. That’s a significant reason so many people are pointing out its many flaws.
The new UI has a couple things i like and a lot of things i don’t like.
Let’s start with the good.
- holding shift to toggle overheat now clearly shows that overheat status might get changed
- The new location of the overheat damage indicators per module is easier to read compared to before, with it now being a flat bar.
- The addition of the capacitor rate meter is something i like. Seeing at a glance if cap will hold or if i need to do something is good. Wish i could make the gj/s number visible though, that and or the time to cap depletion.
Then there’s a couple things that are somewhat neutral, which seem like not really changes as much as getting used to something, at the same time they weren’t broken:
-
The speed bar now being vertical compared to before. Can get used to it, not a giant deal.
Not a fan of the speed meters per second size now being small enough to barely pass as readable on a 1440p screen. -
Safety setting being a shield that is animated rather than a dot with colour is a bit whatever as well, having it change position from capacitor top left to right of the rack is… Well the previous position is as good as the new so might as well keep it there. It grew in size though, and that’s sad, because it’s not important to have up in your face.
Now, theres a couple parts i really don’t like about this new UI which is genuinely infuriating, especially after having come to grips with the present one over the years.
For starters, yes it was a complicated set of gauges condensing a lot of information, but it needs to be because it TELLS a lot of information.
First of all, everything is a lot BIGGER now and takes up more screen space. It doesnt add more information though, there’s just screen wasted between icons that didnt need to, and what little numbers/text there are is barely readably small (speed gauge).
Having the overheat status go from green small dot to big red dot is a bit confusing because traditionally green means “running” or “staged to activate” and red means “will turn off after this cycle” or “damaged”. The Damage indicator is still red and the cycling indicator is still red/green, so having these colours used in two different meanings but actually in the same place is very confusing. The old system to have a stylized lamp that was off (but still green) when running normal and shining bright green when overloaded did NOT clash as much with the “is this module active and well or damaged and turning off?”.
Then, for all the small text, we get the additional info of how long a module is still cycling until shutdown. Unfortunately that number overlay is so big and bold that i cannot at a glance tell anymore which module is about to de-cycle. Good luck finding your buttons when half your active modules are replaced with numbers counting down, not knowing which ones to click again.
The rotating bit to show running vs non running modules i’m a bit indifferent about, personally i dont think it adds anything, at worst it distracts the focus from where it needs to be otherwise.
Last bit and this is actually bad: The new health bars going around in a 3/4 circle rather than 3 layers with 180 degrees each.
Have a look at the following image and guess what ship this is? If you guessed vargur, you’d be correct. What this shows is that vargur has about the same raw HP in shields armor and hull. Amazing. What it doesnt show is, how much resists does this ship have in what layer, so the healthbars aren’t exactly representative of how much of my effective hitpoints are remaining.
And to top it off, the arc i can work with to judge incoming dps and repairs in the one department i care about with this ship, its shield, has shrunk from 180° to 90*. I dont like that.
I have a couple problems with this. The bars ratios show raw hp not factoring in resists. Asking to factor in resists is not a sane request because 1) the resists are different per layer and varied per damage type so making a faithful healthbar will never work out quite right, especially with incoming damage not being uniform either. But at that point, why try to pretend the ratios mean anything and if they dont why not give each layer the same angular resolution they already had?
Similar problems arise on a hecate which has armor with an ancil but usually fits hull rigs because gallente are predisposed to better hull strength + decent resists there + not getting the speed penalty, but needing the buffer to get off all the reps.
Here’s how the controls for my hecate look now. Would you guess that it’s an armor ship? Sure it has some hull buffer and that’s necessary to help with the armor charges, but correctly assessing at which point to start the repairs is now much harder, especially considering that the resistances aren’t identical, with armor resists being a lot higher, making the difference in effective hitpoints much lower than it seems here.
Next, i notice that the design of the bars follows the same trend i see everywhere and loathe, which is to make the icons that used to have depth and soul before, now looking flat and sterile instead. It’s visible in cars which cannot look like cars anymore but have to look like maximally un-decided geometric shapes with sharp corners. This is sad, because it removes a lot of the style eve used to have.
Just take a look at the old capacitor gauge vs the new one. It had rounded edges, a bit of idle pulsing animation and wasn’t trying to be a precision tool either, so it could and did afford to look pretty. The new one is flat, without the depth and almost looks like it would appear in mobile games.
And finally, the big one, which will cost me a couple screenshots…
Especially considering everything else already mentioned, i dislike that the size and empty space between icons has gone up.
Here’s how my screen used to look, configured just about as i like it. The modules on my Hecate are pushed all the way to the right as unfortunately currently the empty slots display doesnt show up. Also the arrangement of modules is to show the point more than them being in slots i’d actually use, to reference the space.
Now with the new and “improved” HUD…
The HUD elements take up so much more space horizontally and vertically that i cant fit a currently not in use fleet chat window or my drones there.
This is using a 27 inch 1440p monitor, i cannot imagine what people running on 15 or 17 inch 1080p displays have to deal with in terms os screen real estate.
So in conclusion, my recommendations for the next iteration:
Please keep the capacitor delta gauge, it is potentially useful information. Especially when adding a “time until cap depletion at current rate”-Field.
Please don’t take up more space with empty space in between that is there to look “modern” but doesnt’ do much.
Please don’t try to shoehorn different layers of health into the same frame of reference, there’s too much nuance for that to work and the current version isn’t broken.
Shield ship? Top layer bouncing around good, 2nd layer bouncing bad. Armor ship? Top layer red normal, middle layer bouncing slowly normal, 3rd layer getting red, oh damn probably close to dying.
Hull tank? First layer goes away fast, 2nd layer goes away fast, 3rd layer *does not move quickly, enemy starts to panic now.
*
Please keep the better readable overheat damage bar, i think it’s an improvement. The old one wasn’t exactly broken as it always served as “can i afford to keep heating this or am i going to risk burning out my modules?”, which both do well at a glance.
Please increase the text size for the speed gauge, i think it should be similar to the other overview text, or at least it should NOT be smaller. If the icons are allowed to take up that much space, why shouldn’t the digital readout that actually conveys something absolute? The relative speed bar is nice as a quick check for warping off and gauging agility, but looking at the absolute speed is sometimes real helpful too when trying to transversal match/otherwise piloting the ship.
Please take another look at the “this module will stop after the current cycle”. I’m not against downcycling modules showing a countdown, but i’d like to still be able to see what module is counting down without much trouble.
Please revert to the three health bars having the same angle resolution. The stacked health bars don’t solve the problem of showing how much effective hitpoints are left except for very niche edge cases where resists are equal among all of them and all damage types, which usually means polarized setups and those are rare/don’t really care either way. Anything with active tank and having to time reps has gotten their life made harder.
And please don’t take up more screen space for any other purpose than actually adding useful information. The only time where spacing things out is viable is if there’s actually meaning in the separation, this trend has happened among many programs and products trying to imitate the iPhone, without considering that in it’s specific use case, the iPhone has very little information to actually put on the same screen and the time it takes to navigate it isn’t critical. Sure it looks clean but its information throughput requirement per single screen is low.
Feels as if this UI is supposed to look fancy to someone who has never looked at the old one before, rather than being efficient to use for people who rely on it to do their work, in this case fly their ships. It feels a bit as if someone changed the order of pedals in a manual car, swapping the gas and clutch pedal because… someone figured the right foot has more control over the clutch maybe. It’s a moreless known standard that of the 3 pedals, clutch is left, throttle is right, brakes in the middle. And turning the steering wheel to the left turns the wheels (and thus a car) to the left. Messing with that arrangement is not advised if anyone is supposed to use that car.
I wish for all of us that eve stays true to its style and doesnt go flashy-flat like seemingly everything else.
See you all in space!
You have a good point here.
I might be wishing we could turn the new HUD off completely, using only the keyboard and mouse. Just think of how wonderful EVE would be, flying on visual flight rules only. @Mike_Azariah you are a pilot, what are your thought of VFR in EVE Online? You don’t need to answer, I know other pilots, one of them admits to getting lost on VFR.
Who?
That is a nice display, I still like the original, but they won’t use this one. They would have to pay all the money they gave to those two devs to Sven Bauer.
Now this is one I can really support.
Have fun!
1- Move the speed control below the circle and set the speed instantly with the cursor.
2- Move all non-essential ship control buttons to the left of the circle.
3- Move the settings button down.
4- Reduce the spacing between buttons.
5- Specify the tank colors, for example, blue for the shield, yellow for the armor, gray for the hula.
6- Place the traffic light and autopilot above and to the sides of the circle.
7- Change the overheat animation to the more informative one from the old HUD.
It is already possible in Eve. Alt+3 to switch to ‘pilot view’. And then keyboard arrow keys, or mouse double clicking to manually pilot.
But… Eve ships are slow and clunky… things happen slowly, not very exciting… Feels maybe like driving a large oil tanker on the sea…
What you would probably be interested in is the Eve Valkyrie Revival Project. It has VR support. And the carrier fighters are more fun to manually pilot - fast and responsive.
I they were being sarcastic. No one would want to fly on visuals only in EVE. Can you even spot another ship at 60 kilometers out? I imagine my venture would be only a pixel in size. Our tactical view is 200 kilometers / 124 miles. Although we are suppose to be in the dark vacuum of space, my ship would be just another dust particle in the game.
Mine safe ![]()
So many players have the same comments about the new HUD why did CCP not spot this!
The new HUD just looks terrible, its too big and has two much space in-between the buttons. There should be away to change the size of the HUD and also to move the button closer!
Overall, I have to say I’m impressed with the new UI. I thought it was easy to get used to, easier to use than the old one and more informative. I’m looking forward to it’s development! After a few days of use, I have two suggestions/requests.
First, I’d like to see the heat bar under the module slightly thicker. Separating it the way you have is a great improvement and the contrast is good, but to my eyes it’s a little difficult to see ‘at a glance’.
My second suggestion would be to allow the map buttons (and map once introduced) to be moved to the left side of the HUD… perhaps with a left/right toggle in the settings. I group combat/module controls and associated windows to the right of the HUD, and group my inventory, D-scan and probe scanner windows to the left. The one thing I don’t really like about the new HUD is having the map controls to the right of my modules. Please either make them mobile or at least have the ability to be toggled on and off.
Thanks for the work, the changes look great so far!
Exactly. We are in agreement. Even though Eve has the basic (barebones) controls built in, I agree it is rather pointless to try and fly on visuals all the time.
![]()
The times I do fly on visuals are limited. Usually it happens when I have to manually pilot to get away from some object, especially those giant NIO objects that like to get in the way of where I’m trying to go, or that jam/obstruct my warp outs. ![]()
Could you please send out an Survey and get full feedback from the community about the new UI.
Also please be transparent and show us the numbers of the Survey and what you have planed to change.
Thank you.
mic drop…















